• Surfaces to receive dB3 should be clean and dry
• Installers should utilize acoustical sealant, tape, sound rated putty and sound isolation materials to preserve acoustical integrity; do not use dB3 within two feet of light fixture
• Install vertically so seams fall on studs
• Attach at the top only with screws and staples; dB3 will be secured permanently when finished wall is fastened
• dB3 may be used on existing finished walls and covered with another layer of drywall
• dB materials can be stiff and less pliable at low temperatures; they are best installed at or above room temperature

* For detailed installation of dB3, reference installation instructions